AIROX FLOWMETER REGULATOR MODEL
A1-AR & A1-CR
Features:
- Rugged forged aluminium alloy body for strength & safety
- Stem type seat assembly for more accurate seating
- Preset outlet pressure at 1.5kg/cm²
- Polycarbonate (PC) flow tube with scale of 0-25 litres per minute (LPM)
- Inlet pressure gauge for inert gas calibrated to maximum pressure 6,000PSI (400 Bar)
- External safety relief for all high pressure models for additional safety
- Bronze filter for all inlet stems
AIROX GAS REGULATOR MODEL A1
Features:
- Rugged forged aluminium alloy body for strength & safety
- Stem type seat assembly for more accurate seating
- External safety relief for all high pressure models for additional safety
- Bronze filter for all inlet stems
PRIMA CO2 FLOWMETER REGULATOR WITH HEATER MODEL 838CR-H
Features:
- Rugged forged brass body for strength and safety
- Inlet pressure Gauge for carbon dioxide gas calibrate to maximum pressure 4,500psi
- Flowrate: 0 - 25ℓ / min
- External safety relief valve on high pressure model for additional safety
- Side entry inlet stem
- Flowmeter with transparent polycarbonate outer cover for easy reading and 360°
- Visibility
- Available in either 36V, 110V or 220V heater
- Certified to standard EN2503
UNI-ARC AUTO-DARKENING WELDING HELMET
"Featuring Filter Lens with Dual Layer LCD for more accurate shade (DIN 9 - 13)"
View More
DURAMAX COWHIDE LEATHER WORK GLOVE
Features:
- Shoulder split cowhide leather
- One piece leather palm
- 100% cotton lined palm
- Double stitching at seams
- Wing thumb contruction
- Excellent durability, wear and comfort
DURAMAX FULL COWHIDE LEATHER WELDING GLOVE
Features:
- Shoulder split cowhide leather
- One piece leather palm and back
- Fully welted seam with double stitching
- Wing thumb contruction
- Excellent overall balance in comfort, dexterity, protection and durability
DURAMAX COWHIDE LEATHER APRON
Features:
- Split shoulder cowhide leather
- Good heat and abrasion resistance
- Ideal for welding, fireplace maintenance, general heat protection, general maintenance and farm work
- Sewn with Kevlar thread
PRIMA FLOWMETER REGULATOR MODEL 838AR & 838CR
Features:
- Rugged forged brass body for strength & safety
- Preset outlet pressure at 1.5 kg/cm2
- Polycarbonate (PC) flow tube with scale of 0 - 25ℓ 4/min
- Inlet pressure gauge for inert gas calibrated to maximum pressure 6,000psi (400 Bar)
- Stem type seat assembly for smoother and more accurate gas flow
- External safety relief valve on high pressure model for additional safety
- Inlet stem with bronze fitter to prevent dirt going into regulator
- Side entry inlet stem
- Certified to standard EN2503
PRIMA LPG REGULATOR
Features:
- Rugged forged brass body for strength & safety
- Stem type seat assembly for more accurate seating
- Certified to EN 2503 CE
- Certificate No. : EC.1282.0R140822.USSTD87
UNI-SAFE FULL LEATHER WELDING SLEEVE
Features:
- Split shoulder cowhide leather
- Good heat and abrasion resistance
- Ideal for welding, fireplace maintenance, general heat protection, general maintenance and farm work
- Sewn with Kevlar thread
UNI-FLEX REINFORCED GRINDING WHEELS
Available In Size :
- 100x6x 16mm
Grade : A24 R8 BF
Usage : For Carbon Steel
- 125 x6x22mm
Grade : A24 R8 BF
Usage : For Carbon Steel
- 180x6x 22mm
Grade : A24 R8 BF
Usage : For Carbon Steel
UNI-FLEX REINFORCED CUTTING WHEELS
Available In Size :
- 107 x 12 x 16mm
Grade :WA60 R8 BF
Usage : For Stainless Steel & Steel
- 100 x3 x 16mm
Grade : A36 Q8 BF
Usage : For Carbon Steel
- 180 x 3 x 22mm
Grade : A36 Q8 BF
Usage : For Carbon Steel
- 355 x 3 x 25.4mm
Grade : A30 R8 BF
Usage : For Cabon Steel
- 405 x 3 x 25.4mm
Grade: A30 R8 BF
Usage : For Cabon Steel
UNI-LIGHT WELDING TORCH SET - LD
Consist of :
- Light Duty Shank
- Light Duty Mixer
- Light Duty Welding Tips#1, #2,#3,#5,#7
- Hose Check Valve 1/4" x VC (12H)
- Hose Check Valve 1/4" x 1/4"(LH)
UNI-LIGHT WELDING & CUTTING SET - TYPE 3
Consist of :
- Type 3 Shank
- Type 3 Mixer (Standard)
- Type 3 Cutting Attachment
- Type 3 Welding lips #1, #2, #3
- Cutting Noz7Jes ANM-6L 1 /32", 1/16"
- Hose Check Valve 3/8" x 1/4" (RH)
- Hose Check Valve 3/8" x 1/4" (LH)
UNI-LIGHT SUPER HEATING PROPANE SET
Consist of :
- Type 3 Shank
- Type 3 Mixer (Propane)
- 28" Bent Neck
- Super Heating Castellated Nozzle 48, 4 & 5
- Hose Check Valve 3/8" x 1/4" (RH)
- Hose Check Valve 3/8" x 1/4" (LH)
UNI-LIGHT SUPER HEATING ACETYLENE SET
Consist of :
- Type 3 Shank
- Type 3 Mixer (Acetylene)
- 700mm Brass Bent Neck
- AHT Heating Nozzle #25, 50 & 100
- Hose Check Valve 3/8" x 1/4" (RH)
- Hose Check Valve 3/8" x 1/4" (LH)
UNI-ARC INVERTER DC
MIG WELDING MACHINE MODEL 250C
Features:
- Single phase 240 VAC and powerfully built for professional use
- Welder can be powered by elecbic generator
- User friendly allowing easy setting of welding arc
- Wide range of welding wire suitable for use with this welder
- 0.6mm, 0.8mm, 1.0mm and 1.2mm
- Good for welding thin gauge plate e.g. steel plate of 0.8mm thick can be welded with 0.8mm welding wire
- Welder complete with cylinder tray
UNI-LIGHT FLOW GAUGE REGULATOR MODEL 848AR & 848CR
Features:
- Working flow rate : 35LPM
- Rugged forged brass body for strength & safety
- Inlet pressure gauge for inert gas calibrated to maximum pressure 6,000psi (400 Bar)
- Stem type seat assembly for smoother and more accurate gas flow
- External safety relief valve on high pressure model for additional safety
- Inlet stem with bronze filter to prevent dirt going into regulator
UNI-LIGHT HIGH PRESSURREGULATOR MODEL 800PSI, 1500PSI & 2500PSI
Features:
- Heavy duty brass forged body & housing
- Sintered bronze inlet filter
- 2-1/2" gauges
- Conforms to ISO 9001 standard for gas pressure regulators
- Max inlet pressure 300 Bar/ 4350 PSI
- Suitable for oxygen, nitrogen & inert gas
UNI-LIGHT REGULATOR MODEL 848
Features:
- Rugged forged brass body for strength & safety
- Inlet pressure gauge for Oxygen gas calibrated to maximum pressure 6,000psi
- Stern type seat assembly for smoother and more accurate gas flow
- External safety relief valve on high pressure models for additional safety
- Inlet stem with bronze filter to prevent dust going into regulator
- Certified to standard EN2503
UNI-LIGHT FLOWMETER REGULATOR MODEL 198-AR & 198-CR
Features:
- Drop forged brass body
- Preset outlet pressure at 1.5kg/cm2
- Polycarbonate (PC) flow tube with scale of 0-25ℓ / min
- External safety relief for all high pressure models for additional safety
- Sintered bronze filter for all inlet stems
- Suitable for Argon (Ar), Carbon Dioxide (CO2) and mixed gases
- Certified to standard EN2503
PRIMA REGULATOR MODEL 838
Features:
- Rugged forged brass body for strength & safety
- Oxygen regulator max. inlet 300 bar, max. outlet 10 bar
- Acetylene regulator max. inlet 20 bar, max. outlet 1.5 bar
- Stem type seat assembly for accurate seating
- External safety relief for all high pressure models
- Bronze filter for all inlet stems
- Fully tested
- Certified to standard EN2503
Contact Info
UNITY Sales & Services Sdn Bhd
No. 43, Persiaran Industri, Bandar Sri Damansara, 52200, Kuala Lumpur, Malaysia
Tel: 603-6275 0668 (Hunting Line) / 6275 3136 / 6275 4028 / 6275 9245
Fax: 603-6272 9088 / 6272 7268
unity@unity88.com